• All Products

      • Charge Air Coolers
        • Charge Air Coolers

          Used to cool the hot, compressed air from the turbo before it reaches the engine, the intercoolers improve engine efficiency and reduce emissions for marine and land-based stationary engines.

      • Exhaust Gas Heat Exchangers
        • Exhaust Gas Heat Exchangers

          Exhaust gas heat exchangers are designed to recover waste heat energy from the exhaust stream of reciprocating engine powered generating sets.

      • Fuel Coolers
        • Fuel Coolers

          Bowman 'copper free' fuel coolers are compact, highly efficient heat exchangers suitable for fuel conditioning rigs in the automotive testing industry.

      • Header Tank Heat Exchangers
        • Header Tank Heat Exchangers

          Engine coolant header tank heat exchangers for marine propulsion, gensets or stationary land-based engines.

      • Hot Tub Heat Exchangers
        • Hot Tub Heat Exchangers

          Bowman EC 80-5113-1T heat exchangers provide a new solution for heating spas and hot tubs in just a fraction of the time taken by traditional electric heaters.

      • Hydraulic Oil Coolers
        • Hydraulic Oil Coolers

          Highly efficient heat transfer solutions for cooling marine, land-based and underground hydraulic systems.

      • Inline Plate Type Heat Exchangers
        • Inline Plate Type Heat Exchangers

          Bowman inline plate heat exchangers are a compact, economical solution for high efficiency heat transfer.

      • Marine Engine Coolers
        • Marine Engine Coolers

          Bespoke cooling solutions for a range of popular marine engines from major OEMs, including coolant heat exchangers, charge air coolers, plus combined heat exchangers and exhaust manifolds, suitable for cooling marine engines up to 1 MW.

      • Marine Transmission Oil Coolers
        • Marine Transmission Oil Coolers

          Bowman has a range of highly efficient oil coolers designed for marine and industrial engines and transmissions.

      • Electric and Hybrid Coolers
        • Electric and Hybrid Coolers

          Efficient heat exchangers for cooling electric marine motors, hydrogen fuel cells, battery packs, chargers, AC-DC converters, DC-DC converters, inverters and associated equipment for electric and hybrid marine propulsion and charging systems.

      • Shell and Tube Heat Exchangers
        • Shell and Tube Heat Exchangers

          Highly efficient heat transfer solutions for cooling a variety of applications where air and fluids need to be cooled by fluids.

      • Stainless Steel Heat Exchangers
        • Stainless Steel Heat Exchangers

          Many applications require stainless steel shell and tube heat exchangers and Bowman provide a standard range of units that are suitable for cooling or heating a variety of fluids.

      • Swimming Pool Heat Exchangers
        • Swimming Pool Heat Exchangers

          Bowman swimming pool heat exchangers are renowned for reliability and efficiency. Whether heating your pool with a traditional boiler or a renewable energy source, Bowman is the obvious choice.

    • All Applications

      • Automotive Testing
        • Automotive Testing

          Premium quality heat exchangers and oil coolers for precise temperature control of engines under test cell development conditions.

      • CHP / Co-Generation
        • CHP / Co-Generation

          Recovering waste heat energy from engine powered generating sets for biogas, diesel and natural gas applications up to 1 MW.

      • Engine Cooling Solutions
        • Engine Cooling Solutions

          Efficient cooling for stationary / land-based engines where air cooling is either unavailable or inappropriate.

      • Electric & Hybrid Marine
        • Electric & Hybrid Marine

          The reliable solution for cooling Electric & Hybrid Marine Propulsion Systems.

      • Industrial Hydraulics
        • Industrial Hydraulics

          A comprehensive oil cooling solution for industrial hydraulic control systems, plus high temperature and mining applications.

      • Marine Hydraulics
        • Marine Hydraulics

          A complete solution for cooling complex on-board hydraulic equipment, including thruster and stabiliser systems.

      • Marine Propulsion
        • Marine Propulsion

          The complete cooling solution for marine engine propulsion, including the latest electric and hybrid systems.

      • Hot Tubs / Spas
        • Hot Tubs / Spas

          An energy efficient solution for heating hot tubs and swim spas faster, significantly reducing heat-up time for guest change-over periods.

      • Swimming Pool
        • Swimming Pool

          Quality heat exchangers for efficient swimming pool heating, using boiler or renewable energy heat sources.

  • Distributors
  • News
  • Knowledge Centre
  • Downloads
  • About Us
  • Contact Us

Bowman intercoolers save the day and thousands of dollars!

The other problem was the price – $5,000.00 US – and he needed two!

Winding the story back, Mark is the proud owner of a very fine offshore sport fishing boat – a Pursuit 3000 Express; one of Pursuit’s most successful designs and a vessel capable of running with much larger boats in ‘blue water’ fishing tournaments.

One of the reasons for the boats popularity is its diesel engines – two Cummins 4BTA, 250 hp units which endow it with performance, fuel economy and reliability – the latter being extremely important for any boat owner when they’re miles offshore!

Mark’s boat is a 1999 model and in excellent condition, no doubt due to the strict maintenance regime he employs on the vessel. With its 20th anniversary approaching, he decided to remove it from the water over winter for some refurbishment. Removing both engines from the hull, closer inspection revealed the original intercoolers had failed and were leaking sea water into the combustion chambers – not great news for an engine’s health and definitely bad news for the bank balance – as Mark found out!

‘’The problem was that OEM parts were no longer available’’ said Mark. ‘’I couldn’t even find a company that could rebuild my leaking intercoolers, which left me with a big problem. Fortunately, I continued my search online and found Bowman. I checked out the specification of their charge air coolers and reckoned their FG100 units would do the job fine. I ordered two from their distributor in Florida and the total cost was about $1800.00. Was I relieved at that saving!’’

The Cummins engines feature a cold start air heater and temperature sensor, which Mark wanted to retain, so he set about adapting the Bowman units to accept the original Cummins equipment. After some time designing and fabricating adaptor plates, the new Bowman units charge air coolers were fitted to the Cummins engines and his work paid off.

’It turned out fantastic’’ said Mark, ‘’we sea trailed her in the Spring and the new coolers worked flawlessly. No issues, no loss of power and no new engines*. In fact, if you were unfamiliar with the engine model, you would never even know these Bowman units were not the original equipment!’’

Bowman marine specification charge air coolers are readily available in a range of sizes to suit engines ranging from 50 kW to 1200 kW, for heat loads up to 100 kW. And, being based on Bowman’s proven ‘shell & tube’ design, they’re easy to maintain and extremely reliable in service.

For customers considering replacing OEM intercoolers, Bowman can accurately select the correct charge air cooler for the application, using bespoke computer-aided selection software.

*With only one OEM replacement intercooler available and not being able to have the original units repaired, the only other option could have been to replace the engines, had the Bowman charge air coolers not been available which would have involved considerable expense to the customer!

Share

Bowman intercoolers save the day and thousands of dollars!

Two Cummins 4BTA Marine Diesel Engines were given a new lease of life and over $8,000 saved by replacing the OE intercoolers with Bowman Charge Air Coolers.
Two Cummins 4BTA Marine Diesel Engines were given a new lease of life and over $8,000 saved by replacing the OE intercoolers with Bowman Charge Air Coolers. Mark Tripi had a problem. He needed two intercoolers to replace failed units on two diesel engines on his boat. The problem was that having scoured the country, only one OEM replacement was available anywhere in the USA!

The other problem was the price – $5,000.00 US – and he needed two!

Winding the story back, Mark is the proud owner of a very fine offshore sport fishing boat – a Pursuit 3000 Express; one of Pursuit’s most successful designs and a vessel capable of running with much larger boats in ‘blue water’ fishing tournaments.

One of the reasons for the boats popularity is its diesel engines – two Cummins 4BTA, 250 hp units which endow it with performance, fuel economy and reliability – the latter being extremely important for any boat owner when they’re miles offshore!

Mark’s boat is a 1999 model and in excellent condition, no doubt due to the strict maintenance regime he employs on the vessel. With its 20th anniversary approaching, he decided to remove it from the water over winter for some refurbishment. Removing both engines from the hull, closer inspection revealed the original intercoolers had failed and were leaking sea water into the combustion chambers – not great news for an engine’s health and definitely bad news for the bank balance – as Mark found out!

‘’The problem was that OEM parts were no longer available’’ said Mark. ‘’I couldn’t even find a company that could rebuild my leaking intercoolers, which left me with a big problem. Fortunately, I continued my search online and found Bowman. I checked out the specification of their charge air coolers and reckoned their FG100 units would do the job fine. I ordered two from their distributor in Florida and the total cost was about $1800.00. Was I relieved at that saving!’’

The Cummins engines feature a cold start air heater and temperature sensor, which Mark wanted to retain, so he set about adapting the Bowman units to accept the original Cummins equipment. After some time designing and fabricating adaptor plates, the new Bowman units charge air coolers were fitted to the Cummins engines and his work paid off.

’It turned out fantastic’’ said Mark, ‘’we sea trailed her in the Spring and the new coolers worked flawlessly. No issues, no loss of power and no new engines*. In fact, if you were unfamiliar with the engine model, you would never even know these Bowman units were not the original equipment!’’

Bowman marine specification charge air coolers are readily available in a range of sizes to suit engines ranging from 50 kW to 1200 kW, for heat loads up to 100 kW. And, being based on Bowman’s proven ‘shell & tube’ design, they’re easy to maintain and extremely reliable in service.

For customers considering replacing OEM intercoolers, Bowman can accurately select the correct charge air cooler for the application, using bespoke computer-aided selection software.

*With only one OEM replacement intercooler available and not being able to have the original units repaired, the only other option could have been to replace the engines, had the Bowman charge air coolers not been available which would have involved considerable expense to the customer!

More News from EJ Bowman

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.